Items:, Value:
Quick search
Online Catalogue
:
Art Materials
:
Mount Cutters
:
Frame Co
Mat Master 90 Deg Cutter (DALLOG804114290)
The Mat Master 90 Degree Straight Cutter ensures safe and easy cutting of cardboard and Foam board. This is the only straight cutter with a retractable blade, so it is safe to leave around on your bench. The retractable blade prevents damage to the blade and injury to hands.
Price: £28.35
(Including: VAT at 17.5%)
Quantity:
Mat Master Base Board (DALLOG804114300)
The Mat Master Base Board improves cutting accuracy and ease of use - available as a separate item to add to your FrameCo 660. The kit includes the spring clips, screws, allen key, which secure the rule to the base board. Also included is the Border Width Gauge or Mat Guide to upgrade the system for quick and easy measuring. A production stop is also included in the kit that is used on the rule with the 201 Bevel Cutter. As with the 660B and 1000B kits, the base board and Mat Guide make measuring up the mat ready for cutting, quicker and easier. The rule can still be lifted off the base for use elsewhere.
Price: £36.50
(Including: VAT at 17.5%)
Quantity:
Mat Master Blades Pack Of 10 (DALLOG804114250)
Mat Master replacement blades especially for FrameCo's range of Mat Master tools.
Thicker than standard blades to prevent hooking at the corners when cutting bevel mats
Price: £2.95
(Including: VAT at 17.5%)
Quantity:
Glass Cutter (DALLOG804213220)
Cuts glass very time! Because the wheel is always at 90 degrees to the glass surface. Eliminates the mistakes we all make when cutting glass. Easy to use and attaches to the Mat Master Rule. Tungsten carbide Cutting wheel for long life - cuts up to 60km of glass
Price: £19.49
(Including: VAT at 17.5%)
Quantity:
Strap Clamp 5m (DALLOG804210106)
The ideal framing clamp. The FrameCo Strap Clamp 5M - 16' holds frames up to 1.25 x 1.25M square. The metal strap enables you to achieve maximum hold but doesn't damage the corners of the moulding due to the special flexible, plastic corner pieces. Clamping is a most important part of the frame joining procedure. If you hold the frame securely then v-nailing will give you a tight secure joint.
Features exclusive corner "wings" to prevent the clamp slipping.
Four corner clamping allows for better control.
Metal strap clamp for stronger holding power.
Metal strap folds easily into holder.
Flexible corner pieces will not damage outside of frame.
Lays flat on the table for easy v-nailing
Price: £51.70
(Including: VAT at 17.5%)
Quantity:
Benchmaster II (DALLOG804214729)
BenchMaster II Joiner (complete with PushMaster) is the ultimate frame joiner for the serious home framer, photographer or artist making frames as a hobby or small business.
Price: £145.00
(Including: VAT at 17.5%)
Quantity:
V-Nails 7mm (400) (DALLOG804210410)
Code 10410 7mm V-Nails x 400/Pk
Yellow cartridge, white top.
Ideal for mouldings up to 2cm x 2cm. Use in soft to medium timbers.
Code 10411 7mm V-Nails Hardwood x 400/Pk.
Yellow cartridge, red top.
Ideal for mouldings up to 2cm x 2cm. Use in hardwood timbers ONLY.
Code 10412 10mm V-Nails x 400/Pk.
Blue Cartridge, white top.
Ideal for moulding up to 3cm x 3cm. Use in soft to medium timbers
Price: £8.25
(Including: VAT at 17.5%)
Quantity:
Select Type
10410 7mm Softwood
10411 7mm Hardwood
10412 10mm Soft to Medium wood
Flexipoints (300) DALLOG804214736)
Flexipoints are small black bendable tabs used to hold the picture into the frame. Can be inserted by the PushMaster , or FlexiMaster into the rebate or back of the frame to secure the backing. Ideal for photography and needlework as they will not rust and also allows easy removal of the artwork.
Price: £3.90
(Including: VAT at 17.5%)
Quantity:
Groove Master Blades (DALLOG804114404)
Short, oblique shaped blades for the GrooveMaster V-Groove and Freestyle Cutter.
Price: £5.70
(Including: VAT at 17.5%)
Quantity:
Online Catalogue
:
Art Materials
:
Mount Cutters
:
Frame Co
